Sponsler's 3A
Sanitary Precision Turbine Flowmeters are constructed of 300 series stainless steel material. The
Sponsler 3A Sanitary series Precision Flowmeter range in size from
3/4" to 4"
and can be installed either horizontally or vertically with a variety of optional end-fittings to meet your needs. With a +/- 0.5% standard linearity and a repeatability of
+/- 0.1% over a nominal flow range, the Sponsler 3A Sanitary series Precision Flowmeter is
built for dairy applications to the standards of the Wisconsin Dairy Association with food
grade, crevice-free Teflon or Carbide sleeve bearings. Our 3A Sanitary series Precision
Flowmeter can handle flow rates of 0.25 to 650 GPM, temperature ranges from -100º F to +
450º F (-100º F to 750º F with hi-temp coil), and can be cleaned without removal using
low-pressure steam. We are so proud of the construction and manufacturing of our 3A
Sanitary Precision Turbine Flowmeter, we put our 3A certification on the meter as a
reminder of the high standard of quality our meters must surpass everyday. You would only
trust your food applications to a meter that said 3A because you know the importance of
accurate, reliable sanitary measurement.
At Sponsler, we agree with you.
|
